Before Washing - Kunft KWM5316 Manual De Instrucciones

Before Washing

Plug in Open tap Load
Note!
• Detergent must be added to "Compartment I" after selecting pre-
washing for washing machines with this function.
Washing
Washing
Select Select function
Programme or default
Note!
• If the default setting is selected, step 2 can be skipped.
After Washing
When the cycle finishes, the message "End" is displayed.
Before Each Washing
• The working condition of the washing machine should be (0-40)° C. If
used under 0° C, the inlet valve and draining system may be damaged.
If the washing machine is worked at 0° C or less, then it should be
transferred to a room with a normal room temperature to ensure the
water supply hose and drain hose are not frozen before use.
• Please check the labels and the instructions on how to use the
detergent before wash. Use non-foaming or less-foaming detergent
suitable for machine washing properly.
Check the label Take the items out
of the pockets
Close door Add
detergent
Start up
Knot the long strips,
zip or button
16
washing machine
Put small clothes Turn easy-pilling
into the pillowcase and long-pile fabric
inside out
Warning!
• When washing a single item of clothing, the washing machine may
move / shake a lot and display a 'great unbalance' alarm. Therefore,
it is suggested to add one or two more clothes to be washed
together so that draining can be done smoothly.
• Don't wash clothes with kerosene, gasoline, alcohol and other
flammable materials.
■
Detergent Dispenser
Pre-Wash detergent
Main Wash detergent
Softener
Pull out the dispenser
Caution!
• Detergent only need to be added in "case I" after selecting pre-
washing for washing machines with this function.
Programme
Cotton
Synthetic
Mix
Jeans
Spin Only
Rinse & Spin
ECO 40-60
20° C
Means must Means optional
EN
KWM5316
Separate clothes
with different
textures
Programme
Bulky / Bedlinen
Baby Care
Wool
Sport Wear
Rapid 45'
Quick 15'
Intensive
17