Srhythm SoulMate Serie Manual De Usuario página 13

Reset Button Function for NEW Version S3:
Press Reset Button 5 seconds for disconnecting Bluetooth connection.
Press Reset Button 12 seconds for resetting earbuds.
①Please make sure earbuds are in full charge,then ignore the Bluetooth pairing
name S3 on your device.
②Remember to open the charging box during reset.then long press the reset
button on the charging box for 12 seconds:
The blue light flashes twice and goes out when press to the 5 seconds.
The pink light flashes twice and goes out when press to the 12 seconds.
③Close the the charging box,reset completely.
④Take out earbuds from charging box,wait 12 seconds for earbuds pair with itself
automatically.
Light on main earbud flashes white and blue,the second earbud doesn't flash if
paired successfully.
Find the pairing name S3 and click to pair.Voice prompt: "Connected" can be
heard.
Replace Silicone Earplug and Ear-tips:
Need to use a certain amount of force to remove the earplugs
Q&A:
1.Why can't the earbuds connect to each other successfully?/Why do I only hear the sound
by one side?
Here are 3 ways to connect:
The First Way: Ignore Bluetooth pairing name S3, then close and reopen your device's
Bluetooth.
The Second Way: Put earbuds back in the charging box, close and reopen the charging
box,then take earbuds out to repair.
The Third Way: Reset earbuds as below steps： How to reset the earbuds?①②③④⑤
2.How to reset the earbuds?
Reset Button Function for OLD Version S3:
Please remember to charging earbuds to be full power before resetting it.
①Take earbuds out of the charging box, long press both earbuds' touchpads for 10 seconds
to turn earbuds off. A beep and a female voice prompt: Power Off can be heard.
②Long press both earbuds' touchpads for 12 seconds,during this process, earbuds are from
turning on to off. The Voice: Power on, Pairing mode and four beeps can be heard sequentially.
③Put earbuds into the charging box, close and reopen it when light of charging box is on.
④Take out earbuds from charging box again, and wait a few seconds for earbud and earbud
pairing automatically. One earbud will flash light and the other earbud will not if paired
successfully.
⑤Ignore Bluetooth pairing name S3 on your device.Close and reopen your device's Bluetooth.
Find the pairing name S3 and click to pair. Voice prompt:Connected can be heard.
English
12