Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7.
Screw U-support tube (#21) to Strut Tubes (#17)
with two Screws (#33) as shown in
holes in U-support with holes in Strut Tubes and
thread screw (#33) into hole in Strut Tube (#17)
tighten screws all the way but be careful not to
over tighten. You could strip threads on screws if
you over tighten.
8.
Attach Hinges (#18) to Strut Tubes (#17) as
shown in
figure 5
shown, align hole in hinge with hole in Strut Tube
and attach with ¼ Screw (#30), Plastic Washer
(#38) and Locknut (#34).
goes between Strut Tube and Hinge. Tighten nut
securely. Repeat for other Hinge.
Hinges must be positioned exactly as shown
or table will not operate correctly and could
be damaged.
Figure 5
32
16
16
30
figure 5
. Align
. With hinge positioned as
Plastic Washer
(#38)
CAUTION:
34
37
21
33
17
34
38
18
Hinge Assembly
9.
Attach Linkages (#16) to Leg (#19) as shown in
figure 5
. Pivot one Linkage (#16) up and pivot
Leg out from top and align hole in Linkage with
hole in Leg (#19). Attach Linkage (#16) to Leg
(#19) using Hex Head Bolt (#32), Spacer (#37)
and Locknut (#34). Spacer (#37) goes between
Linkage and Leg. Attach other Linkage to Leg the
same way. Tighten nuts securely.
10. With at least two adults, repeat steps 6
.
through 9 for other table top assembly.
DO NOT OPEN THE TABLE TO PLAYING POSITION
UNTIL BOTH TOPS ARE INSTALLED! DO NOT LEAVE
TABLE STANDING UNATTENDED. IT COULD BE
KNOCKED OVER CAUSING SERIOUS BODILY INJURY
OR PROPERTY DAMAGE.
34
Spacer goes between
Linkage Arm (#16)
5
17
38
5
19
ATTENTION: If hinge is positioned as
32
shown below (Detail A), flip the hinge as
shown in Detail B.
37
18
and Leg (#19)
Incorrect position
of hinge
16
CAUTION: Hinges must be positioned
exactly as shown or table will not operate
correctly and could be damaged.
33
Detail B
30
34
18
Correct position
of hinge
Plastic Washer goes
between Strut Tube
(#17) and Hinge (#18)
Detail A
17
30
38
17
Tabla de contenido
