Maintaining The Blade; Storage; Disposal And Environmental Protection; Guarantee - Grizzly Tools AKS 2040-21 T Lion Set Traducción Del Manual De Instrucciones Original

Maintaining the blade

The blade must be turned over every
8 - 10 working hours in order to guarantee
even wear (for this, see the "Operation"
chapter).
1. Turn off the appliance and, before do-
ing any servicing, remove the battery.
2. Take off the chain wheel cover (6),
saw chain (1) and blade (2) (see pic-
ture ).
3. Check the blade (2) for wear. Remove
burrs and straighten the guide sur-
faces with a flat file.
4. Clean the oil passage (28) to
ensure fault-free, automatic
oiling of the saw chain during
operation.
5. Assemble the blade, saw chain
and chain wheel cover and re-
tension the saw chain (see the
"Assembly instructions" chapter).
When the oil channels are in opti-
mum condition, the saw chain au-
tomatically sprays a little oil a few
seconds after the saw is started.

Storage

• Clean the equipment before putting it
away.
• Put on blade cover.
• Always empty the oil tank before
pauses in operation lasting several
weeks because the biological chain oil
can become resinous and block the oil
outlet channel. Dispose of used oil in
an environmentally correct manner.
• Store the device in a dry, frost-free,
and dust-protected place and out of
reach of children.
Disposal and
environmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
• Dispose of the equipment in accord-
ance with the local regulations. Take
the equipment to a collection point,
where it will be recycled in an environ-
mentally friendly manner. For informa-
tion about this, ask your local waste
management company or our service
centre.
• Defective units returned to us will be
disposed of for free.
• Place cut branches in compost and
not in the dustbin.

Guarantee

This unit has a guarantee period of 24
months, or 12 months for replacement
units according to the statutory regula-
tions.
Damages, which can be attributed to
natural wear, overloading or inappropriate
use, are excluded from the guarantee.
Certain component parts are subject to a
normal wear and are excluded from the
guarantee. In particular, these include:
Saw chain, chain bar, sprocket chain
wheel and carbon brushes, provided that
the complaints cannot be attributed to
flaws in the materials themselves. Also,
all damage to the machine, the saw chain
and the chain bar, which can be attributed
to inadequate lubrication, are excluded
from the guarantee.
Furthermore, a condition of the guarantee
GB
73