Lenco CR-2003 Manual Del Usuario página 42

7. 7. 7. 7. Troubleshooting Troubleshooting
Troubleshooting Troubleshooting
Error Error
Error Error
The device does not
switch on.
No sound.
No network connection
can be established.
WLAN connection
cannot be established.
No station is found.
Remedy Remedy
Remedy Remedy
1. Check if the power adaptor is connected
properly.
2. The device may malfunction when used in
areas with strong radio interference. The device
will work properly again once there is no more
interference.
1. Turn on the sound as it may be muted
2. Increase the volume.
1. Check the WLAN function.
2. Try to set an IP address at the device.
3. Activate the DHCP function on the router and
make the connection again at the device.
4. A firewall is activated on the network – set
the respective program in such a way that
access is possible.
5. Reboot the unit to try.
1. Check the availability of WLAN network on
the access point.
2. Place the device closer to the router.
3. Make sure the WEP/WPA password is correct.
1. Check the network as well as the access point
and firewall.
2. The station may not be available currently,
try it again later or Select another station.
3. The link of the station is changed or the
42