Product Installation - Sinbo SSI 2893G Manual De Instrucciones

PRODUCT INSTALLATION

1. Unpack the machine and stretch the power cord.
3. Take out the support pole, (as shown in picture), pull out the Pole 3, screw
it clockwise into Pole 4, then pull out the pole 2, screw it clockwise into pole3,
the last pull out the pole 1,screw it clockwise into pole 2.
4. Insert the assembled support pole into the hole on the machine bodyuntil
it reaches the bottom. Screw clockwise the snap close of the hole to fasten
the support pole.
5. Insert the hanger into the top of support pole, screw it to the designed height and then screw the
fixing snap close beneath it to fasten it (as shown in Picture 1). Spread the hanger and screw the
adjusting snap close beneath it to reach a designed range (as shown in Picture 2). (Choose the height
as required).
Fixing Snap Close
6. Insert the hook for ironing brush into the top of support pole and tighten it.
7. Lift down the hood of connecting hole, take out the ironing brush, align the plug of ironing brush with
and insert it into the corresponding hole on machine body, and tighten it clockwise. After using, please
pull out the ironing brush and cover the hood.
2. Take out the water tank, Screw out counterclockwise the water tank
cover, adding water. Then screw on the cover.
Picture 1
- 13 -
Adjusting Snap Close
Picture 2