Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TECHNICAL FEATURES
Clutch: dry clutch with hand control.
Differential: with conical gears, with locking, serial mounted on two-wheel tractors
Brakes: drum brakes with independent control on both wheels.
Handlebar adjustable in height and sidewise in different positions. It can be orientated of 180 degree.
Gearbox with gears: For the forward speeds of the machine with standard wheels and the P.T.O. revolutions,
refer to table 3. If you turn the handlebar steering column of 180 degree toward the engine, you will have
two speeds which, turning the red inverter lever placed on the right side of the handlebar, automatically
become reverse speeds, except for the 3
rd
speed which cannot be selected in this condition.
Safety device: motor-stop combined with clutch for all the machines. Under difficult circumstances, if you
release the motor stop lever, the machine will immediately stop.
It is not possible to start the machine if the clutch lever has not been pulled and it has not been hooked
with stop lever (the machine is with idle gear in this condition). Automatic reverse speed dog to avoid the
simultaneous engagement with the rotary hoe. To conform the machines to the work needs of the different
implements and cultivators, you can change the track and wheel types: SEE TABLE 1.
ACCESSORIES
Cutter bar side protection, cutter bar protection, cutter bar ball-lasts, implement quick hitch, UNI P.T.O.,
snow chains, wheel spacers, adjustable wheel extensions, rotary hoe support wheel, wheel ballasts, chipper
shredder, etc.
SPECIAL IMPLEMENTS AND ACCESSORIES
Besides the implements and accessories given in this manual it is possible to mount special implements and
accessories on machines.
Their use is subordinated to a suitability verification that must consider following elements: dimensions,
which must be suitable with the coupling sizes of the machine parts; needed power, which must not be
higher than the one supplied by the machine.
48
Tabla de contenido
