Intended Use; Identification Plate - Wolf Garten POWER Base 72V Basic Instrucciones De Funcionamiento Originales

Safety information
All manuals and user guides at all-guides.com
General safety information
¾ Before initial use, perform a visual
inspection of the device to check
for damage .Prior to use any damage
must be repaired by a qualified expert
or workshop.
¾ Do not use any damaged, defective
or deformed power packs .
The device is intended for charging power packs of type Li-High Energy 72V; these are
authorised by the manufacturer. Any other use is classed as an unintended use. The
user is liable for any damages arising from unintended use.
Position
The identification plate is located at the charger casing.
Note
The identification is considered as a document. It must never be altered or
obliterated.
Structure
AC/DC Charger
POWER Base 72V Basic
196-652-000
AxxxxMTxxxx
Input:
Output:
MTD Products AG
Industriestr. 23
66129 Saarbrücken
Safety information

Intended use

Identification plate
2016
230 V ~ / 1A 50 Hz
42 V / 2x 1,5 A
T 3,15 A
¾ Do not charge any third party
power packs .
¾ Never try to charge non-
rechargeable power packs .
¾ Do not cover the ventilation slits of
the charger . Otherwise the charger
may overheat and no longer function
correctly.
¾ Repairs must only be performed by
a qualified expert or workshop
1 Type of device (charger)
2 CE label
3 Model name
4 Rated input voltage / Kind of current,
current strength
5 For use inside buildings only
6 Rated output voltage / Kind of current
7 Read instruction manual
8 Manufacturer
9 Disposal note
10 Year of manufacture
11 Model number
12 Serial number
13 Protection class II
14 Frequency
15 Rated output current
16 Fuse
POWER Base 72V Basic |
EN
| 11