Weed Eater WHT18 Manual De Instruccion página 7

Before operating, Insert fully charged battery as illustrated in Figure 2.
To turn tool ON, slide the thumb switch on top of the handle FORWARD. While
holding thumb switch FORWARD, squeeze the trigger switch (under the handle)
to start the unit. See Figure 3. NOTE: Release the SAFETY thumb switch once the
unit is running.
To turn tool OFF, simply release the trigger switch. The thumb switch will snap
backward to prevent the trigger switch from being accidentally depressed.
TRIMMING TECHNIQUES
Maintain proper balance at all times. Keep hands away from blades. Wear eye
protection when using the unit. Hold the trimmer firmly with both hands and turn
ON. See Figure 4.
• The trimmer works best with dry hedges and bushes but it can be used safely
with wet growth due to the low voltage design.
• A wide sweeping cutting motion away from the body is recommended, and will
get the greatest amount of trimming per charge.
All manuals and user guides at all-guides.com
Figure-2
Figure-3
7 7