Barrette Y-LATCH Instrucciones De Instalación página 4

clearance of hinges plus a clearance distance of 1-3/4" to 3" for
the Y-latch (Fig. 1). (See hinge instructions for clearance details.)
WALK GATE INSTALLATION
NOTE: Mount gate on hinges prior to installing the Y-latch.
WALK GATE INSTALLATION
Attach Y-Latch to Fence Gate:
1
Determine Gate Opening:
1.
Place and hold Y-latch on gate upright. Attach Y-latch to gate
Determine Gate Opening:
Determine the gate opening by adding the width of the gate plus
upright with three self-tapping pan head screws (Fig. 2).
clearance of hinges plus a clearance distance of 1-3/4" to 3" for
Determine the gate opening by adding the width of
Determine Location of Stop Bracket:
the Y-latch. (See hinge instructions for clearance details.)
the gate plus clearance of hinges plus a clearance
While the swing arms are lowered and leveled, place stop bracket
NOTE: Mount gate on hinges prior to installing the Y-latch.
distance of 1-3/4" to 3" for the Y-latch.(See hinge
at on the gate while moving the bracket up or down until the
swing arm is level. Once the swing arm is level, mark with a pencil
instructions for clearance details.)
2 the stop bracket location on the side of the gate (Fig. 3).
Attach Y-Latch to Fence Gate:
NOTE:
a. For walk gates utilizing 2" gate uprights and 2" post
Attach Stop Bracket to Gate:
Mount gate on hinges prior to installing the
uprights, the Y-latch can be installed in the same method
With the gate opened, place stop bracket on the gate and align
with the pencil mark. Attach stop bracket to gate with the remaining Y-latch.
as the double drive gate installation (Fig. 5).
three self-tapping pan head screws (Fig. 4).
b. For walk gates utilizing 2" gate uprights and 2-1/2" post
2.
uprights, the post will serve as the Y-latch swing arm stop.
Attach Y-Latch to Fence Gate:
NOTE: Do not install the stop bracket because it will not
a. For walk gates utilizing 2" gate uprights and
Determine Gate Opening:
Determine the gate opening by adding the width of the gate plus
2" post uprights, the Y-latch can be installed
clearance of hinges plus a clearance distance of 1-3/4" to 3" for
in the same method as the double drive gate
PADLOCK OPTIONS
the Y-latch. (See hinge instructions for clearance details.)
installation (Fig. 5).
NOTE: Mount gate on hinges prior to installing the Y-latch.
1
b. For walk gates utilizing 2" gate uprights and
Fig. 3, 4 and 5 Y-latch installation should use padlock option 1
Attach Y-Latch to Fence Gate:
2½" post uprights, the post will serve as the
shown in Fig. 7.
a. For walk gates utilizing 2" gate uprights and 2" post
Y-latch swing arm stop.
uprights, the Y-latch can be installed in the same method
as the double drive gate installation (Fig. 5).
NOTE:
b. For walk gates utilizing 2" gate uprights and 2-1/2" post
2
Fig 6 Y-latch installation should use padlock option 2
uprights, the post will serve as the Y-latch swing arm stop.
Do not install the stop bracket because it will
shown in Fig. 7.
NOTE: Do not install the stop bracket because it will not
not fit on post upright (Fig. 6).
t on post upright (Fig. 6).
Fig. 3, 4 and 5 Y-latch installation should use padlock option 1
shown in Fig. 7.
Fig 6 Y-latch installation should use padlock option 2
shown in Fig. 7.
PADLOCK OPTIONS
1.
Fig. 3, 4 and 5 Y-latch installation should use
padlock option 1 shown in Fig. 7.
2.
Fig 6 Y-latch installation should use padlock option
2 shown in Fig. 7.
4
t on post upright (Fig. 6).
Gate
Upright
2"
Stop Bracket
Fig. 1
MIN. SPACING 1.75"
MAX. SPACING 3.0"
Fig. 3
Fig. 5
Pencil
Drill
MIN. SPACING 1.75"
Swing Arms
MAX. SPACING 3.0"
Screws Arm Bracket
Fig. 3
Fig. 5
Fig. 6
Padlock Option 1
Padlock Option 2
Fig. 5
Fig. 2
Fig. 5
Fig. 6
Padlock O
Fig. 6
Fig. 4
Padlock O
Fig. 7
Fig. 7