Before You Begin; Tools Needed - Barrette Y-LATCH Instrucciones De Instalación

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the gate or individual.
• Not pool code approved.
• Do not allow children to play with the gate.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-877-265-2220.

BEFORE YOU BEGIN:

BEFORE YOU BEGIN:
The primary design of the Y-latch
is for the aluminum double drive gates
Please read the instructions completely before assembling.
with 2" uprights.
Retain manual and your dated sales slip for future reference
or warranty claims.
Gate
Upright
2"
BEFORE YOU BEGIN:
The primary design of the Y-latch
is for the aluminum double drive gates
with 2" uprights.
Component list:
QTY Description
1 Y-Latch
12 Stop Bracket
Gate
1" #2 Square/Phillips Combo
Upright
6
Self-Tapphig Pan Head Screws
2"
MIN. SPACING 1.75"
Stop Bracket
MAX. SPACING 3.0"
To obtain and review a copy of the warranty please visit: barretteoutdoorliving.com. You may also contact us at
1-877-265-2220 or email [email protected]
2
Swing Arms
Stop Bracket
Screws
Swing Arms
Fig. 1
Screws
Fig. 1
Fig. 3

TOOLS NEEDED:

TOOLS NEEDED:
Gate
#2 Square/Phillips Screwdriver
Safety Glasses
Tape Measure
Pencil
Drill
TOOLS NEEDED:
Gate
#2 Square/Phillips Screwdriver
Safety Glasses
Tape Measure
Pencil
Drill
Arm Bracket
Arm Bracket
Gate
#2 Square/Phillips Screwdriver
Safety Glasses
Tape Measure
Pencil
Drill
Fig. 2
Fig. 2
Fig. 4