Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
HOW TO SETUP:
MAIN MENU:
To select any of the menu options, press the MODE button (or UP/DOWN buttons) up to when the
required option is shown on the display.
Select the function with the ENTER button.
Use DOWN and UP button to choose the desired value.
Once the required value is selected, press the ENTER button to select.
DMX512 Address Setting
Used to set the start address in a DMX setup.
Press the MODE button until DMX ADDR is
shown on the display.
Press the ENTER button to select.
Use DOWN and UP buttons to change the
"xxx" DMX512 address.
Once the correct address is shown on the
display, press the ENTER button to confirm.
DMX
Channel Mode
The unit has 2 different DMX channel modes.
With this function you can choose the DMX
mode you want to use. Refer to the DMX-
charts to see the differences.
Press the MODE button until CH.MODE is
shown on the display.
Press the ENTER button to select.
Use DOWN and UP button to select one of
the available channel modes.
Once the mode is selected, press the ENTER
button to confirm.
SLAVE MODE
Used to set the unit in slave mode when you
want to synchronize the output with the
master unit. (when no controller is used and
the first unit is running as master)
Press the MODE button until SLAVE MODE is
shown on the display.
Press the ENTER button to select.
MASTER MODE
Used to set the light output while the projector is working in standalone (master) mode.
Press the MODE button until MASTER is shown on the display.
Press the ENTER button to select.
Use DOWN and UP buttons to change the light output from 000 to 255. (or from 000 to 100%)
Once the desired light output is shown on the display, press the ENTER button to confirm.
DIMMER RESPONSE
Used to select the dimmer mode you want to use.
Press the MODE button until DIMCURVE is shown on the display.
Press the ENTER button to select.
Use DOWN and UP buttons to select the dimmer mode you want to use:
BRITEQ
®
5/39
USER MANUAL
COB PAR56-100
Tabla de contenido
