BeeSecure BEE-LOCK P1 Manual Del Usuario página 13

V1.0
Step 1 Authorization for
setup:
Step 2 Set up:
Function
Reset the lock
Add own Passcode
Change own Passcode
Add User
Delete User
Activate Open Mode
Deactivate Open Mode
Connection of the Lock to
the Hub
Disconnect the lock from
the hub
3. Security Features
3.1 Auto-lock
BEE-LOCK P1 has an auto-lock function. After inputting a valid passcode, you need to rotate
the external knob in clockwise direction within 6 seconds to unlock. After 6 seconds, the
lock will automatically enter sleeping mode, you will have to enter the passcode again to
unlock.
Press ###; Enter your personal 6-10-digit passcode; Press # to confirm
Follow the instructions from the table below
Operation
Press 0 on the main menu;
Enter Master passcode;
Press # to confirm
Press 1 on the main menu;
Enter your new 6-10 digit passcode and press # to
confirm
Re-enter new passcode and press # to confirm
Press 2 on the main menu;
Enter your current passcode; Press # to confirm
Enter a new 6-10-digit passcode and press # to
confirm
Re-enter new passcode and press # to confirm
Press 3 on the main menu;
Press 1 for adding secondary User
Press 2 for adding regular user
Enter new 6-10-digit passcode for the user;
Press # to confirm
Re-enter new passcode and press # to confirm
Press 4 on the main menu
Enter any passcode of the user you want to
delete;
Press # to confirm
Press 5 on the main menu
Enter your passcode
Press # to confirm
Press 6 on the main menu
Press the button on the hub
Press 7 on the main menu
Press 8 on the main menu
User Type
-Master User
- Master User
- Secondary User
- Regular User (with
permanent access)
- Master User
- Secondary User
-Regular User (with
permanent access)
-Master User
-Secondary User
-Master User
-Secondary User
-Master User
-Secondary User
-Master User
-Secondary User
-Master User
-Master User
English