EGAmaster 65512 Manual De Instrucciones página 6

KEY
Speed Key
•
Speed selection key, 4 grades: 600rpm, 300rpm, 5rpm, 0rpm, circulating in
above sequence by each pressing.
•
In CAL mode, 2 grades: shift between 0rpm and 600rpm.
Scan Key
•
Scan angle changing key, when speed in 0rpm, press the key to enter scan
mode, 3 grades of angles: 10º, 30º, 60º circulating in turn.
Cal key
•
Press and hold the key for more than 5 seconds to change to calibration
mode.
•
In Cal mode, serve the purpose of X/Y/Z direction accuracy calibration, shift
and confirmation.
Spot Key
•
Press and hold the key, the unit in manual mode, the laser beam or point will
be left/right titled along X axis direction.
•
In Cal mode, press either of the key briefly to calibrate the accuracy of X/Y
direction.
Spot key
•
When the speed is at 0rpm. Press this key briefly to quick move the laser
point. Press and hold the key to move the rotor slowly.
•
In scan mode, press and hold either of the key to change the scan line to
point which moves slowly. After releasing the key, the unit will be back to
scan mode, and the scan line will be repositioned accordingly.
LEDs display
1. In the levelling process, LED1 Blinks in red and laser beam blinks; After levelling, LED1
turns green and is lit constantly, laser beam keeps emitting, the rotor keeps rotating.
2. In manual mode, LED1 and LED3 are constantly lit in green.
3. IN cal mode, LED1 Blinks fast in green to indicate X axis direction accuracy calibration is in
progress, after that, press scan key to change to Y axis direction calibration and LED2
blinks fast in red. After having done those steps, press scan key again to change to auto-
leveling mode (that will be that status before current calibration).
All manuals and user guides at all-guides.com
FUNCTION DESCRIPTION