Uline H-8277 Manual Del Usuario página 2

Figure 2
Seat Cushion
Armrest
Figure 3
Back Support
Figure 4
PAGE 2 OF 9
ASSEMBLY CONTINUED
2. Slide armrest into corresponding socket on bottom
Lever
3. Position back support in slot between bottom of
4. Slowly lower chair assembly onto the gas lift.
of seat cushion. Push lever in toward armrest to lock.
Repeat on opposite side. (See Figure 2)
seat cushion and mechanism. Align holes and use
three 5/16 x 7/8" screws to attach back support to
mechanism. (See Figure 3)
NOTE: Use Allen wrench to tighten all screws.
Press down on seat cushion to secure in place.
(See Figure 4)
0721 IH-8277