Finish operation
Turn off the appliance and disconnect the mains
plug.
Illustration
Push the take-up cable button. The cable will pull it-
self automatically into the appliance.
Hang the floor nozzle on the backside of the appli-
ance into the parking holder, and push into the
pause position.
Transport, storage
Hold the appliance at the carrying handle when you
want to transport it and store it in dry rooms.
Note: It is recommended that you first completely
push in the telescopic suction pipe.
Care and maintenance
Cleaning the device
Clean the appliance and accessory parts made of
plastic with a commercial plastic cleaner.
Clean the dust chamber with a dry wipe cloth/ dust
brush.
Replacing the filter bag
Order no. 6.904-329
Contents: 5 filter bags with cap and 1 engine protection
filter.
Note
Separate the telescopic suction pipe from the handle to
read the filter change indicator.
Illustration
If the filter change indicator in the cover glows red,
then please change the filter bag.
Use the closing lever and open the lid.
Illustration
Unlock the holder of the filter bags and pull towards
the outside.
Illustration
Close the filter bag using the closing flap, remove
the filter bag and dispose it off.
Illustration
Push the new filter bag into the support until the
stop. First press the flap downwards; then push the
holder into the casing and lock it at the appliance
casing.
Change the motor protection filter
Motor protection filter: change before the last filter
bag is removed from the filter bag package.
The motor protection filter is behind the inserted fil-
ter bag. Change the motor protection filter before
you insert the filter bag.
Illustration
Unlock the frame and remove.
Remove the lower part of the frame, take out old
engine protection filter and dispose it off. Insert the
new engine protection filter in the frame and re-
place the lower part of the frame.
Illustration
Insert and click the frame into its place.
10
Replace HEPA filter
Order no. 6.414-805
Filter for pure blower air.
HEPA filter *: Change once a year.
Illustration
Open cover.
Unlock the HEPA filter and remove.
Illustration
Insert the new HEPA filter and click it into place.
Close the lid.
* EN1822:1998
Cleaning the floor nozzle
Clean the reversible floor nozzle at reglular intervals!
Remove the nozzle from the suction pipe.
Cleaning the accessories
Illustration
Handle and suction tube can be disconnected in or-
der to clean or if clogged. Push the 2 interlocks and
pull apart.
Connect handle and suction tube and insert.
Changing the battery
Note: The battery should not be empty if you want to en-
sure cable-free transmission. Please replace the bat-
tery if you see no reaction or just inadequate reaction
when you press the keys.
Slide and remove the battery compartment cover.
Remove old batteries and dispose them off proper-
ly.
Insert new batteries; pay attention to correct polar-
ity.
Replace the battery compartment cover and close
it.
Technical specifications
Voltage
Current type
Mains fuse (slow-blow)
Protective class
Weight (without accessories)
Action radius
Dimensions
Nominal width, accessories
Sound pressure level
(EN 60704-2-1)
Eco design as per 666/2013
Energy efficiency category
Indicative annual energy con-
sumption
Carpet cleaning class
Hard floor cleaning class
Dust emission class
Sound power level L
Rated power input
Subject to technical modifications!
EN
– 7
220 - 240
50-60
16
II
6,6
10
ø 380 x
380
35
57
A
25,8
D
D
A
72
WA
600
V
Hz
A
kg
m
mm
mm
dB(A)
kWh/a
dB(A)
W