Resetting The Module - THOMSON DIANE-2 Manual Del Usuario

WIFI CONTROL MODULE FOR DOUBLE SWITCHES
C - INSTALLATION
Your module is now operational and appears in
your dashboard. Wait until the icons change from
grey to black (indicating confirmation that the
module is connected to your WiFi network).
You can now control your lights from your
smartphone.
The icon changes to green a few seconds after the
light is switched on. If this does not happen and
the icon remains grey, you must have a connection
problem. Check the range and your WiFi connection.
Check also that the module is still powered.
From this step, you can add this device to the
Google Home and Alexa voice assistants.
10
EN
If you want to give access to your family, they must
download the Thomson At Home app and connect to
the account on which the module is saved.

5 - RESETTING THE MODULE

The following instructions may help you if you have
any problems during the pairing procedure:
To reset the module to 0, press and hold (for at
least 15s) the button located on the back of the
module. The module must also be deleted from the
app. Fast flashing of the LED confirms that the reset
has taken place.
The LED located on the control module gives the
following indications:
- Fast flashing: The module is in pairing mode with
the smartphone
- Slow flashing: The module is connecting to the
server
- LED off: The module is connected. It can be
controlled or it is switched off!