Restarting The Air Conditioner Automatically; Using The Mode Function; Cooling Mode - LG AP09RT Manual Del Propietário

Restarting the Air
Conditioner Automatically
When the air conditioner is turned on again after
a power failure, this function restores the previous
settings.
Disabling Auto Restart
1
Open the front cover (Type 2) or horizontal
vane (Type 1).
2
Press the ON/OFF button and hold it for 6
seconds, then the unit will beep twice and the
lamp will blink twice 4 times.
• To re-enable the function, press the ON/
OFF button and hold it for 6 seconds. The
unit will beep twice and the lamp will blink
4 times.
Type 1
Type 2
NOTE
• The feature may be changed according to the
type of model.
• If you press and hold the ON/OFF button for
3 – 5 seconds, instead of 6 seconds, the unit
will switch to the test operation. In the test
operation, the unit blows out strong cooling
air for 18 minutes and then returns to factory
default settings.

Using the Mode Function

This function allows you to select the desired
function.

Cooling Mode

1
2
ON/OFF
ON/OFF
3
Cooling Mode
Auto Changeover Mode / Auto
Operation(AI) Mode
Dehumidification Mode
Heating Mode
Fan Mode
Turn the appliance on.
Press MODE button repeatedly to select the
Cooling Mode.
• is displayed on the display screen.
Press or button to set the desired
temperature.
EN
17