Nokia X6-00 Manual Del Usuario página 97

Select from the following:
WLAN network name — Select
an existing network, the Wi-Fi network mode and Wi-Fi security mode are determined
by the settings of its access point device.
Network status — Define whether the network name is displayed.
WLAN network mode — Select
devices to send and receive data directly; a WLAN access point device is not needed. In
an ad hoc network, all devices must use the same WLAN network name.
WLAN security mode — Select the encryption used: WEP, 802.1x,
(802.1x and WPA/WPA2 are not available for ad hoc networks). If you select
network, no encryption is used. The WEP, 802.1x, and WPA functions can be used only
if the network supports them.
Homepage — Enter the web address of the starting page.
Use access point — Set the device to create a connection using this access point
automatically or after confirmation.
The available options may vary.
Security settings for WEP
Define the WEP security settings if you have selected the wired equivalent privacy (WEP)
as the WLAN security mode.
1 Select Menu
2 Select the access point group that has the desired WLAN access point, and select the
access point.
You can also define WEP settings when creating a new WLAN access point.
3 Select WLAN security mode
4 Select WLAN security
WEP key in use — Select the wired equivalent privacy (WEP) key number. You can
create up to four WEP keys. The same settings must be entered on the WLAN access
point device.
Authentication type — Select
between your device and the WLAN access point device.
WEP key settings — Enter
format (ASCII
format).
Security settings for 802.1x and WPA/WPA2
Define the 802.1x or WPA/WPA2 security settings if you have selected either as the WLAN
security mode.
© 2009 Nokia. All rights reserved.
Enter manually
Ad-hoc
Settings and Connectivity
>
> WEP.
settings, and define the following:
WEP encryption
or Hexadecimal), and
or Search for
to create an ad hoc network and to allow
> Destinations.
Open or Shared
(length of the key),
WEP key (the WEP key data in the selected
Connectivity
networks. If you select
orWPA/WPA2
for the authentication type
WEP key
97
Open
97