Tabla de contenido
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
INITIAL OPERATION
When you use your appliance for the first time, pour fresh water
•
into the water tank (without coffee) and switch on the appliance.
Once all the water has passed through, switch the appliance off
•
and let it cool down. When it is cold enough repeat the process
with fresh water. Repeat this process 3 times.
SETTING THE CLOCK
Connect your coffee maker to the mains supply and do not press
•
any button.
Press the "program" button. The display will indicate "set".
•
Press the "hour" button until the correct hour is displayed.
•
Press the "minute" button until the correct minutes are displayed.
•
USING THE TIMER
Note: make sure you have put water in your coffee maker before
setting the timer.
Follow steps 1-3 of the "preparation of coffee" section.
•
Press the "program" button twice. The "clock symbol" will be
•
flashing on the display.
Pres the "hour" and "minute" buttons to set the time when you
•
want your coffee maker to start brewing coffee.
Press "auto" button. The "clock symbol" will show on the display
•
and the indicator on the gauge will illuminate red.
When the programmed time is reached your coffee maker will
•
start to brew the coffee. The coffee maker turns off automatically
after two hours.
PREPARATION OF COFFEE
Open the lid of the water tank and place the filter holder into the
•
water tank.
Using the glass carafe, pour the desired amount of water into the
•
water tank. Make sure not to overfill by respecting the maximum
level indicated on the water tank (maximum 15 cups).
4
USK CM 6 Bt - 070809
Tabla de contenido
