Safety
Signs, symbols and instructions placed on this product must never be covered or removed and must
remain present and clearly legible throughout the entire lifetime of the product. Immediately replace or
repair illegible or damaged signs, symbols and instructions. Contact your local dealer for instructions.
Caregiver
Read the "User Guide" carefully before use
•
and keep it for future reference. Incorrect
use of this product may cause serious injury
to the user
Always use the correct lifting techniques
•
and aids for this purpose
Never leave the user unattended in this
•
product. Ensure permanent supervision by
an adult
Repair/replacements must only be made
•
using new original R82 spare parts and fit-
tings and carried out in accordance with the
guidelines and service intervals prescribed
by the supplier
If there is any doubt as to the continued
•
safe use of your R82 product or if any parts
should fail, stop using the product immedi-
ately and contact your local dealer as soon
as possible
Environment
For the purpose of safety and comfort, al-
•
ways move the product away from the sun
and allow to cool before use
Use this product on a level surface without
•
any obstacles. Be aware of reduced maneu-
verability on slippery surfaces
When using on inclines, please refer to
•
measurements
User
If the user is close to the max. load limit
•
and/or has a lot of involuntary movements,
e.g. rocking, a larger size with a higher max.
load or a different R82 product should be
considered
www.support.R82.com
All manuals and user guides at all-guides.com
ENGLISH
Product
•
•
•
•
•
•
•
•
•
Carry out all positional adjustments on the
product and accessories and ensure that all
knobs, screws and buckles are securely fas-
tened before use. Keep all tools out of the
reach of children
Activate the brakes before placing the user
into the product
Ensure the stability of the product is main-
tained before placing the user in it
Ensure the wheels are fully-functional and
secure before use
Inspect the product and all of its accesso-
ries and replace any worn out parts before
use
Do not expose the gas spring to pressure or
high temperatures. DO NOT puncture
Do not expose the piston rod to scratches
etc. It is important to use a cloth or the like,
if tools are used to adjust the gas spring
This product is not to be occupied in a motor
vehicle. The user must be positioned in a ve-
hicle seat and the product must be stored in a
luggage compartment
The user must not occupy the product while
it is being transported into or out of a ve-
hicle by a lift
15
EN