General Information And Warnings - Semilac PRO WHITE Manual Del Instrucciones

on the pedal with your foot. To control the speed with the foot pedal, gradually increase the pressure of your foot on the pedal
until you achieve the desired rotation speed.
DRILL BIT INSERTION INSTRUCTION
Turn the chuck's outer ring left so that the arrow lines up with the open lock symbol (until you hear a click), and insert the
Semilac bit in the handpiece in a way so that the distance between the edge of the handpiece and the lower edge of the bit head
is approx. 5–10 mm. This distance depends on the length of the shank of the bit and individual technique and preferences of the
operator. After securing it in the handpiece, the bit should not protrude too far, because this may cause the handpiece to vibrate
and make excessive noise. The bit should not be placed too deep in the handpiece either, as pushing it too far may damage the
handpiece mechanism. If, after you insert the bit in the sleeve, you feel resistance (which indicates that the bit has reached the
end of the sleeve), move it back out several millimetres. After inserting the bit in the sleeve, turn the chuck's outer ring right so
that the arrow lines up with the closed lock symbol (until you hear a click).
SPECIFICATIONS
Dimensions: 147,3x127,1x102,7 mm
Net weight: 1,56 kg
Rotational speed: RPM max 35 000
Input voltage: 220-240 VAC, 50/60 Hz
Output voltage: DC 30V
Max. power: 65W (max)
CHARACTERISTICS
• Trendy look and simple, aesthetically pleasing design
• Speed can be regulated with the knob or the foot pedal. The device can run in the hand- or foot-control mode; combining
the modes improves work efficiency
• Built-in fuse ensures protection and safety during use
• An easy bit fitting system

GENERAL INFORMATION AND WARNINGS

• Before use, make sure the bit is correctly fitted and secured in the handpiece. Starting the drill with a damaged or not
properly secured bit may cause damage to the device.
• Increase the speed gradually; do not turn the knob too abruptly.
• Do not touch the bits when the device is operating.
• Before changing the direction of rotation of the drill, reduce rotation speed to 0, and only then change the direction using
the switch.
• Do not cover the heat vents.
• Do not use the electric nail drill if the device or the handpiece cable are damaged.
• Correct and proper use in accordance with the guidelines will prolong the device's service life.
• The device is intended for use in enclosed spaces and should not be used outdoors.
• Make sure no liquid finds its way inside the device – this may damage the device.
• After you finish using the device, unplug the AC adapter to disconnect it from the power source.
WARRANTIES
• The warranty period is 24 months from the sale of the device to the first person purchasing it for use. The date of sale may
be determined according to a receipt, invoice, bill or any other document stating such date which the buyer is obligated to
produce.
• In the period covered by the warranty, we guarantee free exchange of the faulty device or repair of damage or faults of the
device resulting from manufacturing defects upon delivery of the faulty device to the point of sale. For devices purchased
online at www.semilac.eu, the address for delivering the faulty device is: Nesperta sp. z o.o., ul. Poznańska 165, 62-052
Komorniki.
• The warranty period shall be extended by the repair time, counting from the day of delivering the device for repair to the
designated date of collection.
• Damage resulting from incorrect use is not subject to warranty and may be repaired only upon payment of repair fees.
• Attempting repair on your own will void the warranty. The warranty only applies within the EU.
• Warrantor: Nesperta sp. z o.o. seated in Poznań, ul. Jugosłowiańska 43, 60-149 Poznań (KRS: 0000463701; BDO: 000111680).
EN 5