Calibration Procedures - TOUGHBUILT TB-H2-LL-100-L2 Instrucciones De Funcionamiento

Should the laser beam keep fluctuating, it is an indication that the tool is tilted beyond
its self-leveling limits. It may also be an indication of low battery power.
PLEASE NOTE: Green laser expands as the distance between the tool and the target
increases. Therefore, always take measurements in the center of the beam.
Before and during work intervals, wipe the laser lens with a lint-free cloth. Any dirt on
the reflector surface may cause laser deflection and lead to false readings.
When not in use, slide the Pendulum Switch to its LOCKED position to prolong battery life.
Prior to removal of the tool from its current location, ALWAYS slide the Pendulum
3
Switch to the LOCK position to prevent damage to the pendulum during transportation.
IMPORTANT REMINDER! At the beginning of each job, mark an index point so that all
future measurements will be based on that index point.

CALIBRATION PROCEDURES:

First step to verify LEVEL (Horizontal) laser beam calibration
To verify the calibration, use a large room (at least 12 x 16 ft).
12