Operating Conditions - Daikin FTXG20LV1BW Operación Manual

Ocultar thumbs Ver también para FTXG20LV1BW:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 162

Operating conditions

Recommended temperature setting
For cooling: 26-28°C
For heating: 20-24°C
Tips for saving energy
Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
Clogged air fi lters cause ineffi cient operation and waste energy. Clean them once in about every 2 weeks.
Notes on the operating conditions
The air conditioner always consumes a small amount of electricity even while it is not operating.
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn off the circuit breaker.
Use the air conditioner in the following conditions.
Operation outside the humidity or temperature range described in the table may cause a safety device to disable the system.
MODE
Outdoor temperature : <2/3/4/5MXS> –10-46°C
COOL
Indoor temperature : 18-32°C
Indoor humidity : 80% max.
Outdoor temperature : <2MXS> –10-24°C
HEAT
Indoor temperature : 10-30°C
Outdoor temperature : <2/3/4/5MXS> –10-46°C
DRY
Indoor temperature : 18-32°C
Indoor humidity : 80% max.
01_EN_3P357704-1.indd 12
01_EN_3P357704-1.indd 12
To change the temperature setting
Press
.
The displayed items on the LCD will change whenever either one of the buttons is
pressed.
COOL operation
18-32°C
Press
to raise the temperature and press
temperature.
Operating conditions
<RXG> –10-46°C
<3/4/5MXS> –15-24°C
<RXG> –15-24°C
<RXG> –10-46°C
HEAT operation
AUTO operation
10-30°C
18-30°C
to lower the
If operation is continued out of this range
A safety device may work to stop the operation.
(In multi system, it may work to stop the operation of the
outdoor unit only.)
Condensation may occur on the indoor unit and drip.
A safety device may work to stop the operation.
A safety device may work to stop the operation.
Condensation may occur on the indoor unit and drip.
DRY or FAN operation
The temperature setting is
not variable.
12
12/17/2013 3:22:02 PM
12/17/2013 3:22:02 PM
Tabla de contenido
loading

Tabla de contenido