Tabla de contenido
Need help? 1.888.398.8643
6
Do not return to place of purchase.
Assembly Instructions
1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.888.398.8643 toll-free . Please have your owner's
manual and model number available for reference .
Note: The model number is printed on a label which can be found on the inside door,
back or side of the base assembly .
Assembly Tips:
1 . Select an area where you will assemble this product . To protect components,
choose a smooth surface that's free of cracks or openings .
2 . Spread out all parts .
3 . Tighten all hardware connections by hand first . Then, before completing each
step, go back and fully tighten all hardware . Be careful not to over-tighten .
That could damage surfaces or strip threads .
4 . For best results, complete each step in the order presented .
To complete assembly you will need:
•
(1) Leak detection solution (instructions on how to make the solution are
included in the "Operating Instructions" section of this manual) .
•
(1) Precision-filled LP gas grill tank with Acme Type 1 external threaded valve
connection (standard grill size) (not included) .
Typical assembly is approximately one hour .
W CAUTION: Two (2) people will be required for assembly.
W WARNING: Failure to position the parts in accordance with
these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage
or personal injury.
3
Attach Side and Rear Panels
Note: Attach bottom screws before attaching top screws . Do not fully tighten screws
until step 5 .
A
x 12
A
Replacement Parts
1.888.398.8643
2
Attach Legs
W CAUTION: Two (2) people will be required to turn the outdoor
fire pit over.
W CAUTION: To avoid scratches choose a smooth surface that's
free of cracks or openings.
Note: Do not fully tighten srews until step 4 .
10
12
B
x 4
4
Attach Base
Note: Tighten all screws from steps 2-4 .
E
E
x 6
B
9
11
Tabla de contenido
