Idiomas disponibles
Idiomas disponibles
EN
- METHOD OF USE AND CODE PROGRAMMING
The device is based on combinations of numbers, activates 2 channels and the code can be composed of 2 up to 8 digits. Once the
combination has been entered, the code must be confirmed by pressing on the desired channel, " " for the 1st channel or " " for the 2nd
channel. If an incorrect combination is entered, the device will issue 5 warning signals once the confirmation button is pressed. If the code
is correct, the device will emit a long beep.
No more than 6 seconds must elapse between one digit and the next; the device will reset and it will be necessary to repeat from the first
digit.
DEFAULT CODES
(programmed at the factory):
◄
1st channel combination, " " button = 11.
2nd channel combination, " " button = 22.
MODIFICATION OF THE COMBINATION
To change the default code associated with the first channel button " " ◄
Keeping the "0" button pressed, press and release the " " button.
•
Release the "0" button
•
Type the default code "11" (or the one previously stored) and press " " ◄
•
Type the new code (up to 8 digits) and press " " ◄
•
Type the new code again and press " " ◄
•
To change the default code associated with the second channel button " ":
Keeping the "0" button pressed, press and release the " " button
•
Release the "0" button
•
Enter the default code "22" (or the one previously stored) and press " " ►
•
Enter the new code (up to 8 digits) and press " " ►
•
Type the new code again and press " ".
•
NOTE: If no number is set during programming of the new code, the device can be operated simply by pressing " " or " " without entering a
combination first.
TO RESET THE DEVICE and reset the pre-set codes ("11" in the 1st channel and "22" in the 2nd channel) set, press the button marked
K_DEL for at least 10 seconds under the keyboard where the components are located.
HOW TO USE
For channel 1 activation:
Type the code associated with channel 1
•
◄
Press the " " button.
•
For channel 1 activation:
Type the code associated with channel 2
•
►
Press the " " button.
•
►
►
◄
►
►
◄
►
◄
►
