Tabla de contenido
Idiomas disponibles
Idiomas disponibles
THE METER STRUCTURE
1) Input Terminals
2) LCD Display
3) Functional Buttons
4) Rotary Switch
5) Trigger: press the lever to open the
transformer jaws. When the pressure on the
lever is released, the jaws will close.
6) Hand Guards: to protect user's hand from
touching the dangerous area.
7) Transformer Jaws: designed to pick up the
AC current flowing through the conductor.
It could transfer current to voltage.
ROTARY SWITCH
Below table indicated for information about the rotary
switch positions.
Rotary Switch
positions
FUNCTIONAL BUTTONS
Below table indicated for information about the
functional button operations.
Button
Operation Performed
• Press HOLD
mode, the Meter beeps.
• Press and hold HOLD
Meter to display full icons.
• Press MAX to start recording and updating of maximum
values.
• Press SELECT button to switch between and
(Figure 1)
Function
Power is turned off.
AC / DC voltage measurement.
Diode test.
Continuity test.
Resistance measurement.
AC current measurement range from 0.001 A
to 400 A
to enter and exit the Hold mode in any
E N G L I S H
Figure 1
button while turning on the
.
23
Capítulos
Tabla de contenido
