Flashing Light - J.R. Automatismos DS191 SW MV Manual Del Usuario

DS191 SW MV: CONTROL BOARD FOR SWING GATES
ON: Start the closing maneuver once the photocell is cut and spend 5 seconds.
Automatic closure deactivated.
OFF
4 INVERSION SHUT
Before opening, the electro lock and closure relay are activated. At the end of the
ON:
closing maneuver tightening time 2 sec for safety.
Normal opening with electro lock.
OFF:
5 OPEN SECURITY CONTACT (CSEG1)
CSEG input stops and inverts 2 seconds the opening maneuver. On closing, stops
ON:
and inverts the maneuver.
CSEG1 input stops the opening maneuver. When CSEG1 is deactivated, the door
OFF:
opens again.

6 FLASHING LIGHT

Flashing.
ON:
Fixed.
OFF:
7 SOFT STOP
Soft stop activated. The door makes a soft stop at the end of the opening and
ON:
closing maneuver(Requires option 8 ON, option 7 generates an impulse per hour.)
Soft stop deactivated.
OFF:
ATTENTION
OPTION 8– Hourly impulse
ON If the door is at rest or open. Perform an impulse for 6 seg every hour.
OFF Normal working conditions.
PROGRAMMING A TRANSMITTER
15