Check Points Before Reporting Malfunction; Maintenance; Specifications; Product Specification - Airvom C201 Guía De Usuario

Check points before reporting malfunction

Issues
Unit fails to turn-on
Air purification is not working
properly
There is an odor from the exhaust
port and filter.
Air speed decreases and noise is
generated.
Product Maintenance
Issues Possible Causes
Power plug disconnected
Unit fails
/power outlet with no electricity
to turn-on
Power switch is off
Filter life span is over
Air intake/Exhaust port is blocked
Purification ability
is weak
Filter is installed in the wrong
Filter is extremly dirty
Amount of purified
air is low
After making sure that all dirt and dusts have been removed, check the surface for
Abnormal noise
If there are substances in the air intake and exhaust port, wipe it clean.
- If the above solutions did not solve the problem, please contact our designated retailer and A/S designated shop.
- For safety, do not disassemble the device yourself, and keep it in the original condition to avoid further damage.

Product specification

Product Name Space sterilization purifier
Model name Airvom C201
Dimension Ø66x180 / 400g
Voltage DC 5V
Certification Number R-R-Nid-AirvomC201
Please note that all product specifications in the table above are data measured in a specific environment, and there
may be slight changes in other service environments. If your product has been technically updated, follow the new
instructions. Additional notices are posted on our website for usage and references.
Possible Causes
Make sure the USB is plugged in properly.
Check if the power plug is connected
Replace filter
Use a product suitable for the area
Remove dust from the air intake
Replace filter.
Filter replacement cycle may vary depending on
the usage environment.
Replace filter.
Try using different power outlet and check
the power plug is properly connected
Clean the Air intake/Exhaust port
or dirty
Re-install the filter in the correct direction
direction
Make sure all dirt and dusts have been removed
damage.
While the plasma function is on, some noise is norma
Power
Consumption
Purifying method
Sound
Components
Coverage area
Solutions
Press "ON/OFF" button
Replace filter
Replace filter
5W
Plasma+Photocatalyst / HEPA filter
≤35dB
Body (Built-in filter)-Adapter-User
Manual
6㎡ (64ft²)
5