Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
7. Repair guide
TROUBLE
PROBABLE CAUSE
• Fuse or circuit breaker blown.
• Loose power line connections to
Fan will not
the fan.
start
• Speed controller not in correct
position.
• Top canopy touching ceiling.
• Loose fan blades screws.
• Ceiling fan not secured against
Fan sounds
ceiling.
noisy
• Incorrect speed controller.
Mechanical
noise
• Fan blades are not horizontal to
ceiling.
• Blade screws are loose.
Fan wobbles
8. Others
•
Have your product repaired by a qualified person.
•
This electric product is in accordance with the relevant safety requirements. Repairs should
Only be carried out by qualified persons using original spare parts; otherwise this may result in considera-
ble danger to the user.
•
Please contact the store which you bought the product for after sale services if question.
SUGGEST REMEDY
Check main and branch circuit fuses
•
or
circuit breakers.
• Check line wire connections to fan.
• Check speed controller's position.
• Lower canopy from ceiling to ensure
minimum 3mm clearance.
Re-tighten all screws on fan blades
•
but
never over-tighten.
•
Re-tighten all screws in the hanging
bracket or plate.
• Change the controller to the one
supplied.
• Allow
at least for 8 hours setting-in
period
.
• Measure from ceiling to tips of blades,
then rotate fan so all blades are
checked for equal height from ceiling
( not adjustments may be made by
slight pressure up or down on blade
holders).
• Make
sure all screws are securely
fastened.
Tabla de contenido
