Test The System And Define Custom Jobs; Testing The System - DOC'UP Smart'Mail 10 Desembalar Y Instalar

7 Test the System and Define
Custom Jobs

Testing the System

Test the system as follows:
1. Load the document feeder trays.
2. Load the envelope hopper.
3. From the 'Home' menu press [New job], [Automatic].
4. Press the [1x] button. If necessary adjust address position, insert position and
insert fingers.
5. Select a job and write down its fold settings.
6. Press the [1x] button.
7. Make sure that the folds are in the correct position. If not correct, adjust the folder
offset (service menu, [Vertical system], [Folder settings]).
8. Make sure that the flap closer quality is sufficient. If not correct, adjust the flap closer
offset (service menu, [Total system], [Job settings], [Flap closer]).
7
17