High Capacity Envelope Hopper (Ef-4) - DOC'UP Smart'Mail 10 Desembalar Y Instalar

High Capacity Envelope Hopper (EF-4)

For feeding large amounts of envelopes a high capacity envelope hopper can be installed.
To start up the high capacity envelope hopper:
1. Switch on the hopper.
3
To ensure correct feeding envelope support A has to be adjusted parallel. Proceed
as follows:
2. Move the high capacity envelope hopper backwards, away from the inserter.
3. Hold an envelope against the hopper plate B as indicated.
4. Place the envelope support A such that the envelope is aligned with recess C.
5. Apply the same alignment at the position of recess D.
6. Adjust the inserter side guides and the separ a tion as described in
7. Put an envelope in the envelope height measurement area.
10
Loading Envelopes.