GOZALO TRINUS 110 Manual De Uso página 12

DESCRIPTION OF POWER SOURCE
TRINUS series welding systems are designed for welding coated electrodes and for TIG welding with SCRATCH
arc ignition; their basic parts are:
1. Control electronics
2. Power electronics
Reduced size and weight make these welders ideal for operators having frequent moving jobs.
The inverter frequency eliminates the characteristic noise of old generation electronic power sources. The welding
bead is more effectively controlled due to the progress of electronic research.
The quality of materials used for manufacturing the TRINUS machines guarantees high performance, long life and
low maintenance.
BEFORE PLUGING AND USE, READ THIS INSTRUCTION MANUAL CAREFULLY.
By following the instructions you can avoid incorrect machine installation.
Damage due to incorrect use invalidates the guarantee.
FOR SPECIAL MAINTENANCE, CONTACT THE DEALER. REPAIRS MADE BY UNAUTHORISED SERVICE
CENTRES INVALIDATE THE GUARANTEE.
Welding power sources must be used exclusively by qualified personnel.
This equipment can work under particularly heavy duty and with temperatures between –10°C (14°F) and +40°C
(104°F).
Welders equipped with PRO-GEN device are protected against high voltage spikes generated from the current
source. The benefit of using this device is mostly evident in case of generating sets power sources „not stabilized
too"; when the high voltage spike occurs, feeding towards inverter is interrupted, then resumed when the spike is
over. The maximum protection voltage is 400V.
Generating set to be used:
STABILIZED GENERATING SET FOR ALTERNATED CURRENT, P>5KVA@60%, 230 V.
1. Placing the equipment
Avoid placing the equipment in areas that limit the air flow from the fan and from the ventilation grids (do not cover
the power source).
Make sure that the environment temperature does not exceed of 40°C (104°F), that there is no wet air containing
dusts, acids, salts, concentrations of ferrous or metallic dust.
Check that the mains voltage is the same as the power source voltage.
Make sure that the power available from the mains is adequate for the power required by the generator (see
technical data).
Make sure that the working conditions conform with the IP 21 S protection degree.
Casings ensure protection of the electrical components against external agents and against direct contact. They
have various degrees of protection against solids and water, depending on the conditions they are used in.
The degree of protection is shown by the letters IP followed by two digits: the first digit shows the degree of
protection against solid objects and the second the degree of protection against water.
I
Description
Digit
Protected against solid objects larger
2
than 12 mm (for example: a finger).
2. Receipt of materials
The package contains:
•
1 power source;
•
1 user manual;
•
1 welding set.
•
1 bag
Make sure that all the materials listed above are in the package. If anything is missing, contact your dealer.
Make sure that the generator has not been damaged during transport. If damage is found, promptly contact your
dealer.
II
Description
Digit
Protected against drops
1
of water falling vertically.
13
Additional
Description
field
Equipment
S
operation.
not in