Strong Racks SR600R Manual De Instrucciones página 19

Hardware Required:
x4
x6
G:
E:
x2
F:
11
Rest the Grid Support Tube (#8) on the Center Grid Support (#7). Align the holes of the Grid
Support Tube with the holes on the 4' end rail. Secure with two Medium Bolts (E) and two Large
Nuts (G). Repeat with other Grid Support Tube. Secure center X brace with two Large Bolts (F)
and two Large Nuts (G). Note: Do not secure to the center X brace until both sides are in place –
see the order in the diagrams below.
1.) Rest each Grid Support Tube on 2.) Bolt the end of each Grid
the Center Grid Support. Do not bolt. Support Tube.
3.) Complete the grid support by bolting the
19
center X brace through both support tubes.