Colour Qc; Measuring Samples; Saving A Tag With A Measurement - VINVENTIONS Wine Quality Solutions NOMASense Color P100 Guia Rápido

6. Colour QC

Measuring Samples

1. Select the Standard icon in the function bar by pressing on the right or left side of the
Navigation control.
2. If the selected standards (indicated by the star) are not the standards required for
sample comparisons, press the down side of the Navigation control and select the
desired standard. Press the Enter button to toggle between selected (star icon) and not
selected (no star icon). Continue for all standards.
3. When finished, press the right side of the Navigation control (Exit) twice to advance to
the Colour QC screen.
4. Lightly press and hold the Measure button to activate the preview. The area to be
measured is indicated in the preview by the circle.
5. When you have located the area you wish to measure, press the Measure button firmly.
6. Continue with additional measurements to obtain an average value if sample averaging
is activated in the Settings.
7. After the measurement, a simulated colour patch of the sample appears along with the
Pass/Fail indication. The sample below would indicate that the sample failed based on
the tolerance set in the Setting menu.
8. Press the down side of the Navigation control to advance to additional QC Sample data
screens.

Saving a Tag with a Measurement

Each measurement is automatically saved in the sample record. A voice tag or text tag can be
saved with each sample measurement.
NomaSense Color P100
8