Full Control Microprocessor (Mcg Fc); End Of Wash Cycle; Easy Control Microprocessor With Keypad And Mechanical Buttons; Full Control Microprocessor - LAVAMAC LH60-165 Manual De Uso

4.7.3. FULL CONTROL MICROPROCESSOR (MCG FC)

After selecting the desired wash program number, by pressing the START button the wash cycle will be started.
If there is no washing program available for the selected program number, INVALID will be displayed.
Program
Number
Wash/Spin Wash Cycle
Sequence Step

4.8. END OF WASH CYCLE

4.8.1. EASY CONTROL MICROPROCESSOR WITH KEYPAD AND MECHANICAL BUTTONS

You can see clearly the end of the washing cycle on the operator panel when the light next to the door
symbol lights up and the time display indicates "0". Open the door with the door handle and take out the
fabrics of the washer extractor.
WARNING!
!
IF YOU CAN'T OPEN THE DOOR, FOR EXAMPLE BY A POWER FAILURE, WAIT A CERTAIN TIME
UNTIL THE SECURITY SWITCH IS COOLED DOWN. THIS IS A SAFETY! THE DOOR CAN BE OPENED
AFTER A COUPLE OF MINUTES. MAKE SURE THAT THE DRUM HAS COMPLETELY STOPPED
AND DRAINED BEFORE OPENING THE DOOR.
When a power failure occurs for a short time, the wash program will continue when the power comes back
on. When the failure occurs for a longer time and the door is still closed the display and the light next to the
start button starts flashing when power is restored. If the door is still locked the timer will continue the program.
For machines initialised as coin operated models, the door will be locked immediately. Press the start button
to continue the program. If the door was opened, the program will be resetted.

4.8.2. FULL CONTROL MICROPROCESSOR

WARNING!
!
IF YOU CAN'T OPEN THE DOOR, FOR EXAMPLE BY A POWER FAILURE, WAIT A CERTAIN TIME
UNTIL THE SECURITY SWITCH IS COOLED DOWN. THIS IS A SAFETY! THE DOOR CAN BE OPENED
AFTER A COUPLE OF MINUTES. MAKE SURE THAT THE DRUM HAS COMPLETELY STOPPED AND
DRAINED BEFORE OPENING THE DOOR. AT THE END OF THE THE WASH CYCLE, WHEN THE
REMAINING PROGRAM TIME REACHES 0, PROGRAM END IS DISPLAYED. WHEN UNLOAD APPEARS
ON THE DISPLAY, OPEN THE DOOR BY THE DOOR HANDLE AND TAKE OUT THE GARMENTS
OF THE WASHER EXTRACTOR. (ONLY FOR MACHINES WITH "FULL CONTROL")

4.9. HOW TO OPEN THE DOOR BY FAILURE

WARNING!
!
THIS HANDLING SHOULD ONLY BE DONE BY QUALIFIED TECHNICIANS! MAKE SURE THAT THE DRUM
HAS COMPLETELY STOPPED AND DRAINED BEFORE OPENING THE DOOR! OPENING THE DOOR
WHILE THERE IS STILL HOT WATER IN THE DRUM CAN CAUSE SERIOUS BURNS! MAKE SURE
THAT THE REMAINING WATER IS COMPLETELY COOLED DOWN BEFORE YOU OPEN THE DOOR!
Should the door fail to open such as the case with a failure, the door can be opened as follows :
1. Remove the lower service panel located on the front of the washer.
2. Behind the panel on the left hand side, there will be a string. Pull this string down, then open the door.
3. Reinstall the service panel.
100246 G PUBLICATION DATE 11 DEC 2007.DOC
Wash Cycle Units
Name
Progression
Bar
Remaining Time
Wash Cycle
USER´S MANUAL
Door State
13