Operating Instructions - SheerAIRE AC-2045DC Guía De Uso Y Cuidado

OPERATING INSTRUCTIONS

NOTE: Before operating the air purifier, record the date of installation on
the HEPA lter. Under normal use conditions (12 hours a day), the HEPA
fi
and VOC filter should be replaced once a year, and the pre-filter should be
replaced every 3 months. To remove and replace either filter, see "Filter
Replacement" in "Care and Maintenance."
1. Check the Air Purifier filters. Before turning unit on, be sure all filters
are correctly in place, and that any plastic packaging has been removed
from filters.
2. Place the Air Purifier on a hard surface such as the floor, table, or desk.
Be sure the grills are not blocked by other objects and that there are
no candles or flames near the unit. The Air Purifier can be positioned
upright or on its back in a horizontal position for operation.
3. Plug into the nearest standard electrical outlet.
4. Press the POWER button to turn the Air Purifier on.
Press the POWER button again to turn the Air Purifier off.
NOTE: Blue back lighting of the display appears for only 30 seconds
when the air purifier is powered on or a button is pressed.
5. When the air purifier is turned on, the fan speed begins at low.
To adjust, press the FAN button until the desired FAN speed is reached.
Press Once
Press Twice
Press Three Times
Press Four Times
6. To activate the 2,4,6 and 8 hour timer, press the TIMER button.
Once the timer is activated, the TIMER icon will appear on the display.
Continue pressing the TIMER to select up to 8 hours of timed operation.
Once the time is selected, the unit will operate and then turn off once
its time limit is reached. To deactivate the timer, press the TIMER
button until the TIMER icon no longer appears on the display.
Number Below
Timer Icon
2
4
6
8
Medium
High
Turbo
Low
Timer
Selection
2 Hours
4 Hours
6 Hours
8 Hours
5
Normal Cleaning
Fast Cleaning
Ultra Fast Cleaning
Quiet Cleaning