Solar Charge Controller - XUNZEL SOLARPOWER-HD Serie Manual De Instalación

4. INSTALLATION
XUNZEL PV modules can be installed both in series and in parallel.
Modules can be wired in series to increase voltage. Connect wires from the positive terminal of one module to the negative terminal of the next module.
Illustration 4.1 shows four modules connected in series.
Series Connection for More Voltage
Fig.: 4.1 Series mounting for more voltaje V
Modules can be wired in parallel to increase current. Connect wires from the positive terminal of one module to the positive terminal on the next module.
Illustration 4.2 shows four modules connected in parallel.
Note: it is recommended that all the connections should be performed using watertight junction boxes. An inadecuate connection may affect seriously
the performance of the entire system, even wasting all the energy generated by the PV modules. Keep in mind that the connection should be durable.

SOLAR CHARGE CONTROLLER

The charge controller is an essential device which assures a correct charge of the battery
avoiding overcharging from the PV modules. The charge controller is connected between
solar PV modules and the battery. Respect always polarity connections (positive wire connected
to the positive poles and viceversa). Follow always the instructions of the charge controller manual.
WARNING: it is strongly recommended the use of a protection fuse in the positive terminal of the battery.
5. WARRANTY
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. The warranty period of Xunzel
for material defects and workmanship is two years from the date of purchase. Proof of purchase will be required.
This product can be only repaired by the Authorised Repair Center of Xunzel Soluciones SL. Xunzel disclaims all liability from damages or malfunctions
if the module i) has been altered or modified by non authorized people, ii) has not been installed, operated, repaired or maintained in accordance with
instructions supplied by Xunzel, iii) has been exposed to abnormal physical, environmental (acid rain), thermal or electrical, negligence or accident.
Warranty coverage does not extend to other componentes of the solar system such as batteries, inverters, or other devices or components not provided
by Xunzel.
Warranty coverage does not apply to damages caused by the use or the installation of the PV modules.
Warranty service is available at the nearest Xunzel Authorised Dealer. It is also posible to contact Xunzel. Deffective parts must be returned to the address
indicated below. Be sure it is insured and packaged securely. Xunzel will not be responsible neither for the costs of the shipment nor the costs of
de-installation or reinstallation.
For more information you can visit us in our web site www.xunzel.com, send us an e-mail to [email protected] or give us a call in the next pone
number (+34) 902540361. Remember to keep your proof of purchase!
XUNZEL
ESB20961561
ES-20850 Igartualdea 57, MENDARO – SPAIN
www.xunzel.com
[email protected]
L-XU2180604 © XUNZEL
The content, artwork, design and all pictures of this document are protected by Copyright law and may not be reproduced, distributed, published or used for any purpose without prior written permission.
Parallel Connection for More Current
Fig.: 4.2 Parallel mounting for more current A
6
SOLAR SOLAR CHARGE
PANEL CONTROLLER*
SOLAR
BATTERY*
*Not included
®
ENGLISH