Technical Data - Rockwell Sonicrafter F30 Manual Del Usuario

3.5A OscillAting tOOl
sYmBOls
WARNING-To reduce the risk of injury,
user must read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Wear protective gloves
Make sure the tool is unplugged prior
to changing accessories.
Before working with your tool make
sure that no power cords will be
damaged.
Avoid danger of injury from the sharp
edges of the accessories.
Accessories can become very hot
while working, presenting danger of
burns!
High oscillation frequency
Low oscillation frequency
8

technicAl dAtA

Rated voltage
Amps
Oscillations speed
Oscillations angle
Protection class
Tool weight (without power cable)
OPerAting instructiOns
nOte: Before using the tool, read the instruction
book carefully.
Assembly and Operation
Action
Mounting Accessories
Mounting the Sanding Sheet
Operating the On/Off Switch
Using the Variable Speed Dial
The Variable Speed Dial can be used to set the optimum
oscillating frequency according to the accessories used
and the respective application.
Oscillation
frequency
High oscillation
frequency:
Low oscillation
frequency:
eng
120 V~60 Hz
11000-20000/min
2.9 lbs
Figure
See Fig. A-C
See Fig. D
See Fig. E
See Fig. F
Application
Sanding, Sawing, Rasping
and Polishing Stone and
Metal.
Scraping, Polishing Varnishes.
3.5 A
4.0°
/II