Fisher & Paykel AquaSmart WL37T26D Instructivo De Instalación página 38

SolMng opelrating IlPr©llb ems
Is the power switched on at the wall?
Unplug from wall Wait 60 seconds, plug back in, turn on and try again.
Could household power supply be at fault? Try plugging in another appliance
Are both hot and cold faucets turned on?
A_e the nlet hose filters blocked? Check the ends of the hoses.
Ensure drain hose is located in standpipe or set tub/sink.
Ensure standpipe or set tub/sink is at least 35 V/' (880 ram) high and no more than 96"
(2438 ram) high.
Ensure load is not out of balance.
Check washer is level and does not rock.
Ensure washer does not have suds buiJdup_
Clothes are unevenly distributed in wash tub, your washer has slowed the spin to compensate
Your washer is designed to automatically sense load size and minimize water use, therefore
the water level may look different to your prev ous washer, this s normal
This unique wash system uses two wash phases. The second phase can be cooler than the first
to minimize energy use. This s normal and will not affect wash performance
Ensure than you are using a High Efficiency (HE) detergent.
Try using a little ess detergent, especially if garments are only lightly soiled