Control Panel; Description Of Commands; Programme Selection Knob; Spin Reduction - Schneider SLA 6100 Manual De Usario

control panEl

DEscription of commanDs

1. programmE sElEction knob

The programme knob is used to select the
desired programme and to turn off the machine.
It can be rotated clockwise and counterclockwise
for easy and fast selection of programmes. The
programmes have preset temperature.

2. spin rEDuction

This button allows for the reduce or exclusion
the spin. When one of the 15 available pro-
grammes is selected, the preset value lights
up. To change this value press repeatedly the
spin key until the desired value is reached. The
corresponding LED lamp will be illuminated to
identify the selected spin value.
3. options
This button allows for the selection of the
available options of the selected washing
programme. The options available are two
- rinse hold and extra-rinse. The selection
is signalled by the illumination of a LED.
Depending on the selection, the LED may be:
• fixed when extr-rinse is selected
• flashing when rinse hold is selected;
• off when no option is selected.
4. start/pausE kEY
This key allows for the starting or pausing the
washing programme for any moment.
5. WasHing pHasEs
During washing operations, a LED would
indicate the washing status.
The possible status are three:
• washing;
• rinsing;
• spinning.

6. cHilD lock

The function activate the block of all buttons
on the control panel. The activation is achieved
by pressing buttons 3 and 4 simultaneously for
15 seconds. The deactivation is achieved by
pressing buttons 3 and 4 simultaneously for 10
seconds. Upon the activation LED spin will be
set to blink slowly until it is deactivated.
EN
15