SlimPANEL™ TRI 24 IP QRG
About This
Guide
Disclaimer
Safety Notes
The SlimPANEL™ TRI 24 IP Quick Reference Guide (QRG) has basic
product information such as mounting, menu options, and DMX values.
Download the User Manual from
The information and specifications contained in this QRG are subject to
change without notice.
These Safety Notes include important information about installation, use,
and maintenance.
•
This product is not intended for permanent installation.
•
ONLY connect this product to a grounded and protected circuit.
•
Always disconnect from power before cleaning or replacing the fuse.
•
DO NOT look at the light source when the product is on.
•
Make sure the power cord is not crimped or damaged.
•
Never disconnect this product from power cord by pulling or tugging
on the cord.
•
When mounting this product overhead, use a safety cable.
•
DO NOT allow flammable materials close to the unit while operating.
•
DO NOT touch this product when it is operating because it may be hot.
•
The voltage of the outlet to which you are connecting this product must
be within the range stated on the decal or rear panel of the product.
•
This product is rated for outdoor use (IP65)! Do not submerge this
product.
•
Always mount this product in a location with adequate ventilation, at
least 20 in (50 cm) from adjacent surfaces.
•
Never connect this product to a dimmer or rheostat.
•
Replace the fuse with the same type and rating.
•
ONLY use the hanging/mounting bracket to carry this product.
•
The maximum ambient temperature is 104° F (40° C). Do not operate
this product at higher temperatures.
•
In the event of a serious operating problem, stop using immediately.
DO NOT open this product. It contains no user-serviceable parts.
•
www.chauvetlighting.com
2
EN
for details.