Intended Use; Initial Use - Beko HBS7750X Manual Del Usuario

Operation
3

3.1 Intended use

This appliance is intended only for
household use; it is not suitable for
professional use.
It is designed for chopping and
whisking small amounts of solid
food only.

3.2 Initial use

1. Clean the appliance parts before
initial use (see 4.1).
2. Use the appliance upright on
a balanced, flat, clean, dry and
non-skid surface.
3. Do not use the appliance
continuously for more than 10
seconds. Turn off the device
when used for more than 10
seconds and wait for 1 min.
before operating again.
10 / EN
When you do not
exceed 10 seconds
in intermittent uses,
C
you can operate the
appliance until the
end of the process by
waiting for a couple
of seconds.
3.3 Blending and
chopping with the
blending shaft
1. Insert blending shaft (1), by alig-
ning ( ) symbol on motor unit
(4) with ( ) symbol and turning
clockwise.
– Make sure ( ) symbol is
aligned with ( ) symbol. Fit it
into its place, do not apply too
much force.
2. Put processed ingredients (in
small pieces) in measuring con-
tainer or a container that you
will use.
3. Immerse blending shaft (1) into
the container.
4. Plug in the appliance.
5. Run the appliance by pressing
operation button (3).
Hand Blender/User Manual