Channel; Setup - Haier 28E2000 Manual Del Usuario

CHANNEL

Air/Cable
Picture
Auto Scan
Favorite
Audio
Channel Skip
Channel Number
Channel
Channel Label

Setup

Lock
Air/Cable – Select the signal type.
• Air – Set the signal type to antenna. When set to Air,
the TV can receive analog and digital (ATSC)
broadcasting signals.
• Cable – Set the signal type to cable. When set to
Cable, the TV can receive analog and QAM
broadcasting signals.
Auto Scan – Press OK to start the auto channel scan.
Favorite – Manually add and skip channels in your
favorite channel list.
Channel Skip – Manually add and skip channels in your
channel list.
Channel Number – Select the channel that you want to
assign a customized label.
Channel Label – Label a channel to make it easier to
identify.
Picture
Audio
Channel
Setup
Lock
1. Press OK to label the selected channel.
2. Press
3. Press to select the desired character for a
4. Press OK after all the desired characters are entered.
SETUP
Air
Select Exit
Menu Language – Select on-screen display menu
language. You can select English/Français/Español.
Aspect Ratio
Full 100%
•
image may appear distorted. (VGA input only)
• Point to Point – Display the VGA signal's original
aspect ratio. Black bars might be added for display.
(VGA input only)
• Normal – Display the original 4:3 aspect ratio with
vertical black bars on the left and right of the image.
• Wide –
16:9 (wide-screen) aspect ratio.
• Zoom
and bottom of the image may be cropped.
• Cinema – Stretch the image at the edges, but keeps
a clear image in the center.
MTS – Select the preferred sound track. You can select:
• Mono
from a weak broadcast signal.
• Stereo – Select this option for programs broadcast in
stereo sound.
• SAP – Select this option to enable audio in an
alternative language, if available.
Blue Screen – When this option is set to On, the screen
will be blue instead of black when there is no input
signal.
Audio Only
audio.
Select Exit
• Audio only works only when the input source is TV and
• To exit audio only mode, press any button.
Time – Adjust the time settings.
Time Zone – Select your time zone.
Sleep Timer – Set the amount of time before the TV
Daylight Saving Time – Select On (if your viewing
area observes Daylight Saving Time) or
viewing area does not observe Daylight Saving Time).
Clock – Set the date and time.
13
Menu Language
Picture
Aspect Ratio
MTS
Audio
Blue Screen
Audio Only
Channel
Time
Noise Reduction
Setup
Lock
– Select the display mode. You can select:
Use this option to view content recorded in a
– Select this option if there is noise or static
NOTE
the TV is receiving a broadcast signal.
English
Normal
Mono
On
Off
Medium
Select Exit
(if your