Setting; Channel - Haier 55UG6550G Manual De Instrucciones

SETTINGS
OSD Language – Select on-screen display OSD
language. You can select English/Français/Español.
Audio Language – Select on-screen display Audio
language. You can select English/Français/Español.
Active Standby Mode Off, then press
choose ON/OFF.
HDMI EDID – Press
then press button to select.
(Optional:Default, 1.4, 2.0 )
Usage Mode – Press
then press button to select.
(Optional:Home Mode, Shop Mode )
Over Scan – Extend part of the display past the visible
area of the screen. The resulting picture will "zoom in"
on the image center.
Closed Caption – Adjust the closed captioning settings.
CC Mode – Select closed captioning mode. You can
select:
CC On – Turn on closed captioning.
CC on Mute – Turn on closed captioning when the
sound is muted.
Reset TV – Reset all settings to the factory defaults.
HDMI CEC –Press OK button to enter CEC Control
submenu.
Audio Only
audio.
button to
button to select HDMI EDID,
button to select Usage Mode,
TTS – Press OK button to enter sub-menu：
TTS – Select On or Off.
Rate Support – Select Mid/Fast/Slow.
Pitch – Select Mid/High/Low.
Volume – Select Mid/High/Low.
NOTE
When in shop mode, the following label will show up.
Please refer to the real TV specific picture.

CHANNEL

Air/Cable – Select the signal type.
Air – Set the signal type to antenna. When set to Air,
the TV can receive analog and digital (ATSC)
broadcasting signals.
Cable – Set the signal type to cable. When set to
Cable, the TV can receive analog and QAM
broadcasting signals.
Auto Scan – Press OK to start the auto channel scan.
ATV Manual Tuning – Press OK to start the ATV
Manual Tuning.
DTV Manual Tuning – Press
Manual Tuning.
Programme Edit – Press
editing programs, press OK to enter the sub-menu.
13
OK to start the DTV
button to select