C. Continuous drainage
For continuous operation or unattended dehumidification, please connect the attached
drain hose to the unit. Condensate water drains freely into a bucket or drainage hole by
using gravity.
•
Place the unit on a horizontal and stable surface.
•
Switch off the unit before operating.
Continuous drainage outlet
•
Securely and properly connect the drain hose and make sure it is not obstructed.
•
Place the outlet end of hose into a drainage hole or bucket and ensure that water can
freely drain out of the unit.
•
Do not submerge the end of hose into water; otherwise it can cause "Air Lock" in the
hose.
To avoid water spillage:
•
As the negative pressure of condensate drain pan is large, tilt the drain hose downwards
toward the floor. It is appropriate that the degree of inclination should exceed 20
degrees.
•
Straighten the hose to avoid bending.
14