Tabla de contenido
Idiomas disponibles
Idiomas disponibles
en
14
Changing the tool.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Press the locking button only when the motor is stopped.
Dismounting the guide roller
(figure 2).
Press the locking button fully through and
hold it in place.
Loosen the guide roller with the (5 mm) Allen
key. Then remove the guide roller.
Fig. 2
2.
3.
Allen key
5 mm
Guide roller
1.
Locking button
Tabla de contenido
