Team kalorik TKG SIS 1001 Manual De Instrucciones página 12

Fax +32 2 359 95 50
Only use the appliance for domestic purposes and in the way
indicated in these instructions.
Never immerse the iron or the base in water or any other liquid for
any reason whatsoever.
Never use the appliance near hot surfaces.
Do not allow the power cord and the cord binding the base to the
steam iron to touch hot surfaces.
Never use the appliance outside and always place it in a dry
environment.
Never use accessories that are not recommended by the
producer. They could constitute a danger to the user and risk to
damage the appliance.
Never move the appliance by pulling the cord. Make sure the cord
cannot get caught in any way. Do not wind the cord around the
appliance and do not bend it.
Always unplug the appliance when it is not in use.
Burns can occur from touching hot metal parts, hot water, or
steam.
Always place the iron on the base of the appliance, on the
therefore foreseen place. Do not place the iron by its rear cover.
Be sure that it does not come in contact with flammable materials
or with the main cord.
Never fill the steam tank with vinegar, descaling agents or other
chemicals.
Before the first use, remove any sticker or protective foil from the
soleplate. Clean the soleplate with a soft cloth.
Some parts of the iron have been slightly greased and as a result
the iron might slightly smoke when switched on for the first time.
After a short while, however, this will cease.
The iron shall be used and placed on a stable level surface.
Do not use the iron if it has fallen, if it shows any visible signs of
damage or if it leaks.
When you place the iron on its support (if available with the
model), make sure that the surface on which you put the support
is stable.
Proceed the same way if the water tank stops working or is
damaged. To avoid the risk of electric shock, do not disassemble
the iron or steam tank, take it to a qualified technician for
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
12
Assembly page 12/64
TKG SIS 1001 - 130827