Installation; Normative And Prescriptions; Preliminary Operations; Appliance Positioning - Lincar 600 Serie Manual De Instrucciones

1 INSTALLATION

RESERVED TO INSTALLER

1.1 Normative and prescriptions

Read carefully the contents of this handbook, it contains important information
•
and instructions for installation, use, maintenance and product safety. This
handbook must be ridden and study in all parts, otherwise it will be consider as "
Improper Use " and a not correct employ of the Lincar equipment.
The appliance must be installed inside an environment considered suitable for
•
installation and use by competent authorities. All laws, standards and
regulations in force on the installation site must be observed, especially
regarding fire prevention.
Technological connection and appliance installation must be carried out by
•
qualify staff authorized to release a conformity certificate according with the
normative in force and current standards.
All the normative concerning civil town planning and/or industrial in force must
•
be respected inside environment installation of appliance.
All laws, standards and regulations in force on the installation site must be
•
observed, regarding: gas and flues, electricity, water and steam, drains and
waste disposal, forced ventilation/extraction, air intake and air conditioning. All
the local and energy supplier authorities's prescriptions must be respected.
The installation must be carried out and certified according to the normative in
•
force regarding: work safety and accident prevention regulations, hygiene and
health, fire prevention, no-panic safety for activities open to public.
The manufacturer declines any kind responsibility in presence of problems
•
caused by a noy correct installation, use or tampering.

1.2 Preliminary operations

Before installation, check the appliance integrity. In case of doubt, do not use
•
the appliance and contact immediately the supplier.
Remove protective films and adhesive labels and eliminate all traces of adhesive
•
with petrol. Do not use aggressive solvents to clean plastic parts.

1.3 Appliance positioning

If the unit is installed against a wall, the wall needs to withstand temperatures of
•
80°C and must be fireproof. On the contrary the unit should be positioned
respecting at least a distance of 5 cm from back wall and 20 cm from side wall.
This appliance type are not suitable to built in.
•
Install the appliance horizontally, correct positioning is obtained by turning the
•
levelling feet.
11/40
mod. G33