Care And Cleaning - Proctor Silex 840239501 Manual Del Usuario

Care and Cleaning

Iron
1. Turn temperature control dial to APAGADO (OFF/O). Unplug
and let cool. The iron takes longer to cool down than it does
to heat up.
2. To empty water from iron, open water tank door and then tilt
pointed end of iron over sink until water runs out.
3. Wrap cord loosely around iron and store iron in an upright
position. To avoid damaging the iron, do not store laying flat
on soleplate.
Soleplate
1. Never iron over zippers, pins, metal rivets, or snaps, since
these may scratch the soleplate.
2. To clean occasional buildup on the soleplate, wipe with a
sudsy cloth. Do not use abrasive cleansers or metal scouring
pads.
3. Always store iron upright in the heel rest position.
Self-Clean Feature
1. Fill iron with water.
2. Plug in iron.
3. Turn temperature control dial to the highest cotton/linen
(Algodón-lino) setting.
4. Let heat for 2 minutes.
5. Turn adjustable steam dial to
tank is empty.
6. Unplug iron.
(self-clean) and hold until
19